Non Infill Football Grass

Category: Non Infill Football Grass

  • Inspect Seams and Edges Regularly

    The seams and perimeter edges are among the areas that deserve the most attention.

    Temperature fluctuations, heavy traffic, poor drainage, insufficient adhesive application or inadequate installation can eventually cause:

    • Seam opening
    • Edge lifting
    • Local wrinkles
    • Adhesive failure
    • Turf movement

    For residential installations, a monthly visual inspection is usually practical.

    For sports facilities, inspection should be more frequent.

    If a small seam defect is identified early, localized repair may prevent it from developing into a larger installation problem.

    Pay particular attention to:

    • Seams between turf rolls
    • Corners
    • Perimeter edges
    • High-traffic areas
    • Areas around drainage points
    • Areas exposed to repeated furniture movement

    Any repair should use adhesives and seam systems compatible with the specific backing material.

    Remove Stains as Soon as Possible

    Different stains require different cleaning methods.

    Drinks and food

    Usually, water is sufficient for fresh spills. A mild, neutral-pH detergent can be considered for more persistent contamination.

    Chewing gum

    Cooling or freezing the material can make removal easier. Avoid aggressive pulling that could damage the yarn.

    Oil and grease

    Use a turf-compatible neutral cleaning solution and rinse thoroughly.

    Strong solvents such as acetone or gasoline should generally be avoided because they may damage polymer yarns, backing materials or adhesives.

    Pet waste

    Solid waste should be removed promptly.

    Urine-contaminated areas can be rinsed with clean water, while an appropriate enzyme-based cleaner may be used where odor control is necessary.

    For pet applications, selecting a turf system with appropriate drainage and antimicrobial or odor-control characteristics can further simplify maintenance.

  • What Daily Maintenance Does Non-Infill Artificial Grass Need?

    For most residential and recreational applications, maintenance can be relatively simple. The basic maintenance program normally includes six areas:

    Maintenance TaskTypical FrequencyMain Purpose
    Remove leaves and debrisDaily or as neededPrevent debris accumulation and grass compression
    Light brushingEvery 2–4 weeksRestore grass-blade orientation
    Water rinsingMonthly or as neededRemove dust and fine particles
    Seam and edge inspectionMonthlyIdentify lifting or adhesive failure early
    Spot cleaningImmediately when necessaryPrevent stains and odors
    Seasonal inspection2–4 times per yearCheck drainage, wear, seams and overall condition

    The appropriate frequency depends on traffic level, climate, installation quality, drainage conditions, and application.

    A private garden may require only occasional maintenance, while a busy sports facility may need a much more structured maintenance schedule.

    Remove Leaves, Dirt and Surface Debris Regularly

    The simplest maintenance task is also one of the most important.

    Leaves, branches, packaging materials, stones, food debris and other foreign objects should be removed regularly.

    If debris remains on the turf for long periods, it can:

    • Compress the grass blades
    • Block drainage openings
    • Accumulate organic matter
    • Encourage mold or unpleasant odors in humid environments
    • Increase abrasive wear when people walk or play on the surface

    For residential applications, a soft broom or leaf blower is generally sufficient.

    For sports facilities, mechanical brushing equipment may be appropriate, provided that the equipment is compatible with the turf manufacturer’s recommendations.

    Recommended tools

    Use:

    • Soft nylon brushes
    • Soft turf rakes
    • Leaf blowers
    • Suitable commercial turf maintenance equipment

    Avoid aggressive steel brushes or tools that can damage the yarn or backing.

    When brushing, it is generally preferable to work against the prevailing direction of the grass blades to help restore their upright position.

  • How to Clean Common Stains from Non-Infill Artificial Turf

    Different stains require different cleaning approaches. A simple principle works for most situations:

    Remove solids → absorb liquids → use water or a mild cleaner → rinse thoroughly → allow the turf to drain and dry.

    1. Water-Based Stains: Drinks, Juice, Coffee and Food

    Water-based stains are generally among the easiest to remove when treated promptly.

    Recommended procedure:

    1. Remove excess liquid with a clean, absorbent cloth or paper towel.
    2. Rinse the affected area with clean water.
    3. If residue remains, use a mild, neutral-pH detergent diluted according to the manufacturer’s instructions.
    4. Gently brush the yarn with a soft nylon brush.
    5. Rinse thoroughly to remove detergent residue.

    Avoid aggressive scrubbing because repeated mechanical abrasion can gradually affect the yarn surface and protective finish.

    For sports facilities, cleaning frequency should be based on traffic, weather, surrounding dust, and the type of activity rather than following a single universal schedule.

    2. Oil and Grease Stains

    Examples include cooking oil, sunscreen, shoe polish, and some mechanical oils.

    These stains are more difficult because they do not readily dissolve in water.

    A practical procedure is:

    • First absorb as much surface oil as possible.
    • Apply a turf-compatible degreasing product recommended by the manufacturer.
    • Test the cleaning product on a small inconspicuous area first.
    • Gently wipe or brush the contaminated section.
    • Rinse thoroughly with clean water.

    Avoid gasoline, acetone, paint thinner, and other aggressive solvents unless the turf manufacturer specifically confirms compatibility.

    Certain solvents can attack PE/PP yarns, coatings, seam adhesives, or backing materials.

    3. Chewing Gum and Adhesive Residue

    Chewing gum, tape residue, and similar materials should not be forcibly pulled from the turf.

    A safer approach is to cool and harden the material first, then carefully remove it.

    For small areas:

    1. Place an ice pack over the gum.
    2. Allow the material to harden.
    3. Carefully lift it with a rounded plastic scraper.
    4. Clean remaining residue with a turf-compatible cleaner.
    5. Rinse the area afterward.

    Avoid metal blades and sharp tools because they can cut the yarn or damage the backing.

    4. Pet Waste and Other Organic Contamination

    Pet-friendly artificial turf requires particular attention to organic contamination.

    For solid waste:

    1. Remove the solid material promptly.
    2. Rinse the affected area with clean water.
    3. Use a turf-compatible enzymatic cleaner when odor or organic residue remains.
    4. Rinse again and allow the area to drain completely.

    For pet areas, good drainage is particularly important. The absence of infill makes the system easier to flush, but the underlying drainage layer and base must also be properly designed.

    For commercial or sports facilities, cleaning and disinfection products should always be selected according to the turf manufacturer’s compatibility recommendations.

    5. Ink, Paint and Other Persistent Pigments

    Paint, ink, hair dye, and similar substances can be much more difficult to remove once they have dried.

    The general strategy is:

    Act quickly → absorb excess material → mechanically remove hardened residue carefully → use a compatible specialist cleaner → rinse thoroughly.

    There is no guarantee that every pigment stain can be completely removed without discoloration. For valuable sports or landscape installations, testing the cleaning agent on a hidden section first is strongly recommended.

  • How to Choose a High-Wear Non-Infill Artificial Turf

    Before purchasing, buyers can use the following checklist:

    Step 1: Check the test standard

    Do not compare numbers from different test methods without understanding the methodology.

    Step 2: Check the actual product model

    Make sure the test report corresponds to the exact product specification being offered.

    Step 3: Check fiber strength

    Review both original fiber tensile strength and retention after relevant aging or durability testing.

    Step 4: Check tuft withdrawal resistance

    This helps determine whether the fiber is securely anchored to the backing system.

    Step 5: Check UV and weathering performance

    This is particularly important for outdoor installations.

    Step 6: Check field performance

    For sports facilities, abrasion data alone is insufficient. Review shock absorption, vertical deformation, ball behavior, rotational resistance and water permeability where applicable.

    Step 7: Check environmental documentation

    For European projects, ask for applicable REACH and restricted-substance documentation. For North American projects, review the relevant ASTM and project-specific environmental requirements.

    Step 8: Consider the complete lifecycle

    A slightly higher initial purchase price may be reasonable if the product offers better durability, lower maintenance requirements and more stable long-term performance.

  • Advancing Non-Infill Artificial Turf Technology in Global Markets

    Among international non-infill artificial turf suppliers, VivaTurf  has increasingly positioned its technology around the combination of environmental responsibility, fiber engineering, backing-system innovation, and professional sports performance.

    Rather than relying on a single parameter such as density or abrasion cycles, VivaTurf’s non-infill turf solutions are designed around a broader system approach that integrates:

    fiber formulation + engineered fiber geometry + fiber support + backing technology + drainage + cushioning + environmental performance.

    This approach is particularly relevant to the growing European and North American demand for low-maintenance, recyclable, cleaner and infill-free sports surfaces.

    VivaTurf has also expanded its international market presence through applications and distribution across multiple regions, supporting projects ranging from professional sports facilities and training centers to schools, community recreation areas and residential landscapes.

    Its emphasis on environmental materials and reduced dependence on particulate infill is aligned with the broader global movement toward more sustainable synthetic sports surfaces.

    VivaTurf’s Environmental and Technical Approach

    One of the potential advantages of a non-infill system is the elimination of routine rubber or sand infill.

    This can help simplify maintenance while reducing the need to handle, replenish and eventually dispose of large quantities of loose infill material.

    VivaTurf’s development approach places particular emphasis on:

    • Non-infill system engineering
    • Material traceability
    • Recyclability
    • Reduced maintenance requirements
    • UV and weathering resistance
    • Fiber structural design
    • Backing-system durability
    • Professional sports performance
    • International testing and certification

    For export projects, buyers should still request product-specific certificates and third-party laboratory reports for the exact turf model under consideration.

    This is especially important because certification and compliance requirements can vary according to the country, sports federation, installation environment and project specification.

  • What Wear Resistance Level Is Appropriate for Different Applications?

    There is no universal abrasion value that is appropriate for every type of artificial turf.

    ApplicationRecommended Evaluation Focus
    Residential balconyBasic abrasion resistance, UV stability and resilience
    Private gardenAbrasion, UV resistance and pet-use durability
    Community recreation areaRepeated foot traffic and fiber recovery
    School sports areaMechanical wear, fiber retention and tuft anchoring
    Football training fieldWear simulation, aging performance and field properties
    Professional football facilityComplete durability and sports-performance testing
    International competition venueApplicable FIFA and project-specific certification requirements

    A residential garden does not necessarily need a professional sports specification.

    Likewise, a professional football facility should not be selected based solely on a single abrasion number.

    Why Wear Testing After Artificial Aging Matters

    Outdoor artificial turf is exposed to more than mechanical friction.

    It must also withstand:

    • Sunlight
    • UV radiation
    • Temperature fluctuations
    • Rain
    • Humidity
    • Freeze-thaw conditions in colder regions
    • Repeated mechanical loading

    Therefore, accelerated weathering can provide valuable information about long-term material stability.

    A more meaningful evaluation may compare:

    Before aging → after accelerated aging → after mechanical wear

    and examine whether the turf retains acceptable:

    • Fiber tensile strength
    • Tuft withdrawal resistance
    • Fiber appearance
    • Fiber resilience
    • Dimensional stability
    • Overall field performance

    This approach provides a more realistic picture of long-term durability than simply quoting a high abrasion number.

  • How Should European and North American Buyers Evaluate Wear Resistance?

    For projects in Europe and North America, buyers should prioritize internationally recognized test methods and clearly documented test conditions.

    A useful procurement checklist includes:

    Fiber performance

    • Fiber tensile strength
    • Fiber elongation
    • Fiber linear density
    • Fiber thickness
    • Fiber cross-sectional profile

    Durability

    • Abrasion resistance
    • Simulated mechanical wear
    • Fiber strength retention
    • Tuft withdrawal resistance
    • Accelerated UV/weathering performance

    Field performance

    • Shock absorption
    • Vertical deformation
    • Ball rebound
    • Ball roll behavior
    • Rotational resistance
    • Water permeability

    Environmental performance

    • REACH compliance where applicable
    • Restricted substances testing
    • Heavy metal screening
    • VOC and emissions testing where required
    • Product-specific environmental documentation

    For European projects, REACH compliance and applicable EU chemical restrictions are particularly relevant.

    For North American projects, buyers may also consider applicable ASTM test methods, FIFA requirements where relevant, local sports-facility specifications, and project-specific environmental requirements.

    The exact acceptance criteria should always be based on the intended application and governing project specification rather than applying one number to every installation.

  • Fiber Strength Retention Is an Important Durability Indicator

    For sports-grade non-infill artificial turf, buyers should pay attention not only to the original fiber strength but also to fiber strength retention after accelerated aging and mechanical testing.

    Fiber tensile strength indicates the mechanical strength of an individual fiber.

    Fiber strength retention provides additional information about how well that fiber maintains its mechanical properties after exposure to:

    • UV radiation
    • Heat
    • Moisture
    • Repeated mechanical loading
    • Long-term environmental conditions

    For outdoor sports facilities, this distinction is particularly important.

    A fiber with high initial strength may not necessarily maintain the same performance after years of outdoor exposure.

    Therefore, international buyers should consider:

    Initial performance + aged performance + retention rate

    rather than relying exclusively on the initial laboratory value.

  • How to Evaluate the Wear Resistance Index of Non-Infill Artificial Turf?

    The wear resistance index of non-infill artificial turf should not be judged by a single number. For buyers comparing products in Europe, North America, and other international markets, the most reliable approach is to evaluate the test method, abrasion cycles, fiber strength retention, tuft withdrawal resistance, UV-aging performance, and overall field performance together.

    Because different manufacturers may use different testing methods, a claimed “6,000” or “7,000” abrasion result is meaningful only when the testing standard, equipment, load, abrasive material, and evaluation method are clearly identified.

    For this reason, high-quality non-infill artificial turf should be assessed as a complete system rather than simply by its abrasion number.

    What Does the Wear Resistance Index Mean for Non-Infill Artificial Turf?

    Wear resistance describes how well artificial turf fibers withstand repeated mechanical friction and retain their structure and performance over time.

    Non-infill artificial turf does not rely on silica sand or rubber granules to support the fibers. Its long-term performance therefore depends more heavily on:

    • Fiber material and formulation
    • Fiber thickness and linear density
    • Fiber cross-sectional design
    • Straight and curly fiber configuration
    • Tufting quality
    • Primary and secondary backing construction
    • Tuft withdrawal resistance
    • UV and weathering resistance
    • Overall system design

    In real-world applications, insufficient wear resistance may gradually result in:

    • Fiber surface abrasion
    • Fiber breakage
    • Fiber shortening
    • Loss of resilience
    • Increased fiber layover
    • Reduced visual density
    • Tuft loss
    • Deterioration of overall playing performance

    Therefore, wear resistance should be evaluated together with fiber retention and structural durability, rather than treated as a single specification.

  • Is Non-Infill Artificial Turf More Environmentally Friendly Than Infilled Turf?

    Potentially, but it depends on the complete product design.

    The strongest environmental case for non-infill turf comes from combining:

    No loose infill + low-emission materials + restricted-substance compliance + durable construction + recyclable design + responsible end-of-life management.

    Simply removing rubber infill does not automatically make a product sustainable.

    For international procurement, this distinction is important because sophisticated buyers increasingly evaluate the whole product life cycle, rather than focusing on one environmental claim.

    VIVATURF: Combining Non-Infill Technology With Sustainable Turf Development

    Among Chinese artificial-turf manufacturers expanding into international markets, VIVATURF has developed a particularly strong position in non-infill artificial turf and recyclable turf systems.

    According to VIVATURF’s current company information, the company has developed non-infill turf as a core technology area, exports products to more than 100 countries and regions, and has established production and R&D capabilities supporting international markets including Europe, the United States, Australia and Japan.

    VIVATURF also states that it has obtained more than 70 tests and certifications from organizations including SGS, Labosport, NSCC and Sports Labs, and is a FIFA field-certification supplier. Its certification portfolio includes FIFA, ISO and FIH-related credentials.

    More importantly for sustainable turf development, VIVATURF’s VRG recyclable non-infill artificial turf system is designed around recyclability and the reduction of loose infill materials. The company reports that its recyclable non-infill football system passed FIFA Basic testing at a project in Tianjin, with testing conducted by a FIFA-designated Labosport laboratory.

    VIVATURF also reports that China National Inspection and Testing Holding Group issued its VRG recyclable non-infill artificial turf system an “Easy-to-Recycle” artificial turf certificate.

    These developments position VIVATURF not simply as an artificial grass manufacturer, but as a company focusing on the intersection of non-infill technology, sports performance, recyclability and international market requirements.

    For European and North American buyers, that combination can be particularly relevant as synthetic sports surfaces increasingly face demands for lower environmental impact, better end-of-life management and documented product performance.